
GO! Strip Cutter-2 1/4" (1-3/4" Finished)
Tax excluded. Shipping calculated at checkout
Make binding, narrow borders, string piece, and 1 3/4" finished sashing in a flash with the GO! Strip Cutter. This die makes quick and perfect work of cutting 2 1/4" strips from multiple layers of fabric. The razor-sharp blades are 23" long and open at both ends to cut folded fabric right off the bolt. Includes one GO! Strip Cutter - 2 1/4" (1 3/4" Finished) Die.
GO! Strip Cutter - 2 1/4" (1 3/4" Finished) Die
What's Included
Includes one GO! Strip Cutter - 2 1/4" (1 3/4" Finished) Die.
Cutter Compatibility
- Compatible cutters: GO!, GO! Bolt, GO! Big.
- Not compatible: GO! Me, GO! Baby.
- Studio / Studio 2: Requires the GO! Die Adapter for this die-board size. Adapter sold separately.
Product Specifications
- Brand: AccuQuilt
- Product line: GO!
- Item number: 55053
- Die-board size: 10 in. x 24 in. (25.4 cm x 61 cm)
- Cutting mat: GO! Cutting Mat, 10 in. x 24 in. (25.4 cm x 61 cm) (sold separately).
- Finished size: 1 3/4"W (4.4 cm)
- Cut size: 2 1/4"W (5.7 cm)
- Manufacturer product weight: 3.74 lb.
Features and Cutting Instructions
How to Die Cut 2 1/4" Strips:
- 2 1/4" Strips: Cut 9 1/2" wide strips across the width of fabric to cut four, 2 1/4" strips. Position fabric on die so fold of fabric is perpendicular to cutting blades and will roll through the cutter first. One yard of 40" wide fabric cuts 15 strips.
- 2 1/4" Squares: Start with a 2 1/4" strip aligning it across the die board with the 90° guide line. Fanfold into 9 1/2" widths. Cut 16, 2 1/4" squares across the width of fabric. One yard of 40" wide fabric cuts 240 squares.
- 45° Diamond-3 1/4" Cut Side Edge: Start with a 2 1/4" strip. Align your 2 1/4" strip across the die board to the right side of the 45° guide line.
- 30° Diamond-4 1/2" Cut Side Edge: Start with a 2 1/4" strip. Align your 2 1/4" strip across the die board to the right side of the 30° guide line.
- 60° Diamond-2 5/8" Cut Side Edge: Start with a 2 1/4" strip. Align your 2 1/4" strip across the die board to the right side of the 60° guide line.
Why Quilters Love the GO! 2 1/4" Strip Cutter Die:
- The smaller the strip, the more difficult it is to cut accurately. The GO! Strip Cutter-2 1/4" makes it easy to cut perfect single and double-fold bindings (finishes to 7/8" wide), narrow borders, 1 3/4" finished sashing, string piecing, bindings and more.
- No sliding rulers! No miscuts! The GO! Strip Cutter-2 1/4" includes four strips that can be a challenge to cut by hand.
- Idea for scrappy quilts! Easily cut up to 6 layers of scraps or full length fabric on the die to get 12 perfectly cut 2 1/4" strips in one pass thru the cutter.
- GO! Strip Cutter-2 1/4" includes 1/4" seam allowances for easy alignment and piecing.
- Cut perfect 2 1/4" strips, then use the angled guide lines to cut squares and diamonds.
- Die blades are 23" long and are open at both ends to allow cutting of fabric that is still folded as it comes off the bolt.
- Cut strips out of a variety of fabrics: cotton, batiks, flannel, fleece, Cuddle® fabrics and more!
- Free pattern downloads available to get you started.
AccuQuilt Benefits:
- Cut so much more fabric in less time.
- Get accurate cuts every time -- No slipping rulers or mistakes
- Easiest to use -- Simply place die on cutter, then fabric and cutting mat on top
- Save fabric with Two Tone Foam -- Get more out of your fabric by placing it only over the shape you want to cut.
- Safe to use -- No blades come anywhere near your fingers
Die Tips:
- With some fabrics, after cutting, a thread or two will remain where die blades meet. Snip threads with scissors.
- Blades on some dies are positioned at an angle. Align fabric to edge of shape, not edge of die board.
- Use good quality fabric to reduce fabric stretch.
- It's always a good idea to test cut one shape before cutting many shapes to ensure fabric orientation is correct.
Patterns:
Pickup available at 213 E Boyd Ave - Store
Usually ready in 24 hours

GO! Strip Cutter-2 1/4" (1-3/4" Finished)
213 E Boyd Ave - Store
Pickup available, Usually ready in 24 hours
213 E Boyd Ave
Boyd TX 76023
United States
We process and ship all orders within 5–7 business days.
Enjoy Free Shipping on all orders over $100!
For orders under $100, standard shipping rates apply.

GO! Strip Cutter-2 1/4" (1-3/4" Finished)
Sale price$129.99
($129.99 each)


GO! Strip Cutter-2 1/4" (1-3/4" Finished)
Tax excluded. Shipping calculated at checkout